Aipedia: Energy assessors and retrofit coordinators
AI floor-plan and phone-scan tools can speed up EPC measurement, but the assessor remains responsible for every dimension under reg 24(1) of the 2012 Regulations. Small area or wall errors can move a band, and buyers, tenants and landlords rely on that band.
Part of: AI in energy assessors and retrofit coordinators
In short
Phone-scan apps and AI floor-plan tools calculate dimensions and areas for RdSAP and SAP quickly. They do not apply the methodology conventions or your scheme rules, and they can misclassify walls, miss spaces or fill scan gaps silently. The assessor must check the figures, because reg 24(1) of the EPB Regulations 2012 requires reasonable care and skill and schemes audit the evidence behind each input. A claim from a wrong band is usually treated as negligence under PI, subject to the terms, including any software exclusions and how repeated errors aggregate.
Floor area and heat loss perimeter sit at the heart of an RdSAP or SAP calculation. Assessors may use phone-scan apps, laser devices linked to AI software, and tools that read an existing plan and calculate dimensions and areas automatically. The appeal is obvious: a full set of room dimensions in minutes, a tidy floor plan for the evidence pack and less time on site.
The output is a measurement, not an assessment. The software does not know which conventions the methodology and your scheme expect, which spaces count as part of the dwelling, or which walls are party walls rather than exposed walls. Those are judgements the assessor still has to make.
There is no AI-specific rule for measurement. The duties come from the general regime and are worth stating plainly:
Our EPC and PAS 2035 rules map explains how these provisions fit together.
Measurement errors are rarely dramatic on their own. The problem is that they flow straight into the rating and the recommendations. Common failure points include:
Illustrative: an assessor uses a phone-scan app on a terraced house with a rear extension. The app treats a shared wall as exposed and misses a loft room. The resulting EPC sits one band lower than it should. A landlord relying on it spends money on measures to reach a target the property may already have met, and later claims the cost from the assessor. A scheme audit of the same job finds the dimensions cannot be supported by the evidence kept.
A claim that an EPC was wrong because of a measurement error is usually treated as a claim for negligent professional work, subject to the policy terms. The fact that an app produced the dimensions does not usually change that, because the assessor adopted them. Points that can affect cover include any exclusion for failure or malfunction of software, the excess, and whether the limit is adequate if one tool error repeats across many certificates. Repeated errors may be aggregated or treated as separate claims depending on the wording; see any one claim versus aggregate limits.
A failed scheme audit is not itself a claim, but a pattern of unsupported measurements could lead to re-lodgement work and client complaints. Talk to your broker early if you discover a systematic problem. The minimum cover is set by your scheme; Elmhurst, for example, requires members to arrange their own PI and separately insures lodgement through its systems. The basics are covered in Do energy assessors need PI insurance? and Does PI cover AI errors in EPCs and retrofit?.
A few habits keep AI measurement useful without letting it run the assessment:
Measurement errors often show up alongside data-capture problems, so read AI photo evidence and site data capture too.
Apex arranges PI for domestic and non-domestic energy assessors. A broker reviews your scheme minimum, your limit and how your policy treats errors from measurement software. See the AI in energy assessment hub for related guides.
You can use the app to help, but you remain responsible for the dimensions under reg 24(1). Check them against the methodology's conventions and your scheme's evidence requirements, take manual check measurements, and keep evidence an auditor can follow.
Floor area and heat loss perimeter feed directly into the rating and the recommendations. A small error can move a property across a band boundary, and buyers, tenants and landlords may make financial decisions based on the band.
That depends on your scheme's operating requirements. In general, a generated plan shows what the software calculated, not what was on site. Keep the site evidence the scheme asks for and check the plan against it.
Usually a claim that the EPC was wrong is treated as negligence, because the assessor adopted the figures. Check whether your policy has exclusions for software failure and how it treats repeated errors from the same tool.
Tell us about your firm and the work you do. A broker will review how your current PI treats AI-assisted work, or arrange new cover. No fee for a quote. Or call 0117 325 0027.
Start a PI quote Request a callbackApex Insurance Brokers Limited is authorised and regulated by the Financial Conduct Authority. Registered in England and Wales, company number 07014570. This page is general information about how AI is used in the profession and how insurance may respond. It is not legal, regulatory or insurance advice on your circumstances, and it does not guarantee that cover will be available or on what terms.