Aipedia: Principal designers and building safety
Principal designers can use AI, but neither the Building Safety Regulator nor HSE has published AI guidance for them, so the existing competence and coordination duties apply in full. On higher-risk buildings, an AI-assisted error can surface years later under a long limitation period.
Part of: AI in principal design and building safety
In short
A principal designer (PD) may hold two roles: the CDM 2015 PD, who manages health and safety risk in design, and the Building Regulations PD under Part 2A, who plans, manages and monitors design work so it would comply. Neither HSE, which enforces CDM, nor the Building Safety Regulator, a standalone body since 27 January 2026, has published AI guidance. The legal test is competence under regs 11F and 11G. AI can help with coordination, documents and records, but the PD stays accountable. There is no statutory PI requirement for PDs, so cover usually follows the PD's profession and contracts.
The term principal designer (PD) now covers two legal roles. The CDM 2015 PD plans, manages and monitors the pre-construction phase so the project can be built, used and maintained safely. The Building Regulations PD under Part 2A of the Building Regulations 2010 (England) plans, manages and monitors design work so that the design would comply if built. One firm often holds both roles.
Common AI uses include:
Each touches a statutory duty. AI changes how the work is done, not who answers for it.
There is no AI-specific rule for PDs. The duties below apply whatever tools are used.
| Source | Key provisions | Where AI meets the duty |
|---|---|---|
| Building Regulations 2010 Part 2A | reg 11E checks before appointing; reg 11F competence; reg 11G PD competence; reg 11I notice of ceasing to be competent; regs 11J and 11K designer duties; reg 11M PD duties and 28-day handover document | competence to judge AI output; coordination and monitoring of design; accuracy of records |
| CDM 2015 | reg 5 appointment; reg 9 designer duties; reg 11 PD duties at the pre-construction phase; reg 12 health and safety file | risk registers, pre-construction information and health and safety file content |
| SI 2023/909 (HRB procedures) | regs 4 and 12 approval applications; Schedule 1 documents; reg 31 golden thread; regs 32 to 37 mandatory occurrence reporting; reg 38 handover | Gateway 2 packages, golden thread records, occurrence triage |
HSE enforces CDM 2015. The Building Safety Regulator (BSR) is the building control authority for HRBs in England and became a standalone arm's-length body on 27 January 2026, sponsored by MHCLG. The guide to PD duties and AI maps each duty to AI use in more detail.
No BSR, HSE or MHCLG guidance specific to AI use by principal designers had been published as at October 2026. The BSR's standalone announcement mentions a new Innovation Unit but gives no AI detail. With no single professional body for PDs, the nearest guidance comes from bodies whose members act as PDs:
CROSS-UK Report 1554 (16 July 2026) is the clearest building safety signal. It concerned an AI-written structural calculation for an existing mixed-use building. The panel cited the Part 2A competence duties in regs 11F to 11H, said approving authorities may wish to seek clarity on how far AI contributed to submissions, and suggested designers consider disclosing AI-assisted outputs.
Behind all of these sits competence. The competence question guide looks at whether relying on AI can itself raise a reg 11G question.
There is no statutory PI requirement for principal designers under Part 2A or CDM 2015. Competence is the legal test. In practice PI is set by appointment contracts and by the PD's own profession: ARB sets a minimum of £250,000 each and every claim in its PII guidance, and RICS sets minimum limits by turnover in its PII requirements.
A claim that a PD failed to coordinate design or produced inaccurate records will usually be treated as a professional negligence claim whether or not AI was involved, subject to the policy wording and to the PD role being declared. Two features need care:
No insurer or regulator statement on AI and PI for PDs had been published at the time of writing. See principal designer insurance and what insurers ask about AI.
Apex arranges PI for principal designers, whether the PD role sits within an architect's, engineer's or surveyor's practice. A broker can check that the PD role, HRB work and AI-assisted coordination are described properly to insurers and explain how fire safety terms would apply. See PI for CDM principal designers.
Not as at October 2026. No BSR, HSE or MHCLG guidance specific to AI use by principal designers had been found. The existing Part 2A, CDM 2015 and SI 2023/909 duties apply in full, and the CROSS-UK panel has suggested approving authorities may ask how far AI contributed to submissions.
Yes. Nothing in Part 2A or CDM 2015 prohibits it. The PD must still be competent under reg 11G, coordinate and monitor design work under reg 11M, and stand behind every document produced, so AI output needs checking by someone able to judge it.
Not by statute. Competence is the legal test under regs 11F and 11G. PI requirements usually come from appointment contracts and from the PD's own profession, such as the ARB minimum of £250,000 each and every claim or RICS minimum limits by turnover.
Tell us about your firm and the work you do. A broker will review how your current PI treats AI-assisted work, or arrange new cover. No fee for a quote. Or call 0117 325 0027.
Start a PI quote Request a callbackApex Insurance Brokers Limited is authorised and regulated by the Financial Conduct Authority. Registered in England and Wales, company number 07014570. This page is general information about how AI is used in the profession and how insurance may respond. It is not legal, regulatory or insurance advice on your circumstances, and it does not guarantee that cover will be available or on what terms.